As you probably already know, getting your plumbing repaired can be expensive. If you would like to avoid this costly service in the future, it might be worthwhile to learn to solve plumbing problems yourself. Read on if you would like to become a plumbing expert and save money.
Look closely at your toilets several times throughout the year. Check to see if there are any leaks that you may not have noticed; you can do this by placing five or six drops of food coloring in the tank. If there is a leak, the color will seep into the bowl within half an hour. This process will help you catch a small problem before it gets too out of control.
Be careful about using liquid clog cleaners. These liquids can contain chemicals that are extremely bad for your pipes. Instead, use a snake or a plunger to dislodge any clogs you might encounter. Be sure to try these things before giving up and calling a plumber, who will probably re-perform those same acts.
If you have bad water pressure in the shower, the showerhead might be clogged. Take a plastic baggie, fill it with regular vinegar, and tie it to the showerhead so that the showerhead is covered. Leave it overnight. In the morning, take the baggie off and use a small toothbrush to scrub away any mineral deposits.
Make sure you clean out overflow holes in your kitchen and bathroom sinks on a regular basis. These holes are intended to act as an emergency fail-safe to prevent spillage from a full sink, but if they are clogged they can’t do their job. You can clean out an overflow hole using the same techniques you would for a clogged drain.
Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what’s left of the tab gets washed into the bowl. This can then end up clogging the toilet’s port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.
Got a leaky pipe? In many cases you can repair this yourself without the expense of a plumber. If a joint is leaking, tighten it with a pipe wrench. If the leak is coming from a damaged section of pipe, you can try repairing with a store-bought patching kit. One method involves applying waterproof tape to the section of pipe where there is leakage. Before applying the tape, make sure the pipe is thoroughly dry. Make sure that the tape covers two to three inches on either side of the breakage in the pipe.
Make sure to pour a gallon or two of water into drains that are used infrequently. Not only does this make sure that they are clear when you need them, but can also fill the trap and make sure that unpleasant odors don’t enter your home. Doing this periodically will also help you to catch problems before they become serious.
Knowing how to solve your own plumbing problems is important. You’ll be able to respond to problems quickly, and avoid having to pay an expensive plumbing service to fix what you could have done yourself. Try applying these tips next time there’s a problem, and see if you can fix your own plumbing.