Snake Away Your Plumbing Problems Today

Taking a step into the wondrous and complex land of plumbing for the very first time might feel a bit daunting. However, by keeping the helpful tips listed below in mind, you will soon find yourself plumbing on par with some of the best plumbers in the field and maintaining your own easily.

Avoid the bursting of pipes due to the change in the temperature. You need to allow the flow of heat to reach under the sinks and into the pipes, you have to keep the cabinet doors of the bathrooms and kitchens open. It is important to keep water running at both hot and cold faucets along with vanities that are in close proximity to exterior walls.

To winterize a house that will sit unused during the winter months, you must completely drain all of the pipes. After turning off the main water supply, let all of the water drain from the faucets, toilets, and water heater (turn off the gas). Add a quart of antifreeze to sinks and the tub to prevent water from freezing in the drain trap.

During the winter, preventing frozen pipes when you live in a small dwelling can be something good to know. Frozen pipes will not only stop your flow of water but can crack and damage pipes. By running a little water out of every faucet during the coldest parts of the day, you can avoid this.

At least once a year remove the faucet aerator and clean the screens. This helps it properly function. The function of a faucet aerator is to allow for an even flow of water and to conserve water. Be sure to clean out the aerator and you’ll notice a these things working.

If your house uses well water and there are orange or pink stains in tubs or sinks, it’s because of the iron level in the water. To get rid of this problem, you can either use a commercial product to soften the water, or have a contractor come to your home and do the work for you.

Got a leaky pipe? In many cases you can repair this yourself without the expense of a plumber. If a joint is leaking, tighten it with a pipe wrench. If the leak is coming from a damaged section of pipe, you can try repairing with a store-bought patching kit. One method involves applying waterproof tape to the section of pipe where there is leakage. Before applying the tape, make sure the pipe is thoroughly dry. Make sure that the tape covers two to three inches on either side of the breakage in the pipe.

Set the temperature on your hot water heater to a temperature that does not exceed 120 degrees. This helps to save energy and prevents the water from becoming too hot and potentially scalding someone in your household. Older models that do not have a temperature setting should be set on Medium.

So, after reading and applying the helpful tips listed above, you should feel a bit more at ease in the land of plumbing. You have the tools; it’s time to use them. You should feel empowered and ready to begin your plumbing journey to start taking care of your home’s plumbing system.